Daikin warmtepomp
Fault 7H: too little water flow
Too little water is flowing through the heat pump. Often due to air, a dirty filter, low pressure or closed valves.
Do this first
- Check the system's water pressure (usually 1 to 2 bar).
- Check whether the valves of the underfloor heating or radiators are open.
- Clean the filter by the indoor unit if you know how; otherwise have it done.
When should you call an engineer?
If 7H keeps coming back, have an installer check the pump and the filter.
Reset
Turn the heat pump off and on again via the controls. For an outdoor unit fault it sometimes helps to switch off its circuit for a few minutes.
Still under warranty?
Add your warmtepomp to your home file, with the installation date. Then you'll see whether it's still under warranty and get a reminder for servicing.
Add applianceFrequently asked questions
What does 7H mean on a Daikin warmtepomp?
Too little water is flowing through the heat pump. Often due to air, a dirty filter, low pressure or closed valves.
Can I fix 7H myself?
Check the system's water pressure (usually 1 to 2 bar). Check whether the valves of the underfloor heating or radiators are open. Clean the filter by the indoor unit if you know how; otherwise have it done. If 7H keeps coming back, have an installer check the pump and the filter.
Other Daikin codes
Checked in 11-2026. Codes can differ per model; if in doubt, check the manual of your appliance.