Remeha error codes
What the codes on your Remeha cv-ketel mean (Calenta Ace, Tzerra Ace, Avanta, Calenta), what you can safely do yourself and when you need an engineer.
Where do you see the code?
On the Calenta Ace and Tzerra Ace a code starts with A (warning, the boiler keeps working), H (blocking, temporary) or E (lockout, the display flashes red).
Reset
You clear a lockout (E code) with the 'Reset' button, once the cause is gone. A blocking (H code) usually clears by itself.
The Calenta Ace shows low water pressure (below 0.8 bar) without a code: top up to 1.5 to 2 bar.
All codes
- A.02.34Boiler has to top up too oftenThe boiler has to top up water more often than normal. Water is probably leaking somewhere. The boiler keeps working.Engineer needed
- A.02.33Topping up takes too longThe boiler tops itself up, but it takes too long. The boiler keeps working normally.Often fixable yourself
- AFTop-up noticeOn a boiler with semi-automatic top-up, AF means the water pressure is too low and the boiler wants to top up.Often fixable yourself
Questions about Remeha
How do I reset my Remeha cv-ketel?
You clear a lockout (E code) with the 'Reset' button, once the cause is gone. A blocking (H code) usually clears by itself.
Where is the fault code shown on my Remeha?
On the Calenta Ace and Tzerra Ace a code starts with A (warning, the boiler keeps working), H (blocking, temporary) or E (lockout, the display flashes red).
Which Remeha faults can I fix myself?
A.02.33 (topping up takes too long), AF (top-up notice): the page for each code lists the steps you can safely do yourself.
Other brands central heating boilers
Checked in 11-2026. Codes can differ per model; if in doubt, check the manual of your appliance.