Vaillant cv-ketel
Fault F.22: too little water in the boiler
The boiler detects too little water or too low a pressure and protects itself against boiling dry. Usually the water pressure is too low.
Do this first
- Look at the pressure gauge: below 1 bar the system needs topping up.
- Top up to 1.5 to 2 bar and then bleed the radiators.
- Press reset once.
When should you call an engineer?
If you have to top up more than a few times a year, water is leaking somewhere. Have an engineer check the system and the expansion vessel.
Reset
Press the reset button once (on most ecoTEC models the button with the arrows or 'reset'). If the boiler goes into fault again, don't keep resetting but call an engineer.
Still under warranty?
Add your cv-ketel to your home file, with the installation date. Then you'll see whether it's still under warranty and get a reminder for servicing.
Add applianceWant to know more? Read central heating boiler not working: what now?
Frequently asked questions
What does F.22 mean on a Vaillant cv-ketel?
The boiler detects too little water or too low a pressure and protects itself against boiling dry. Usually the water pressure is too low.
Can I fix F.22 myself?
Look at the pressure gauge: below 1 bar the system needs topping up. Top up to 1.5 to 2 bar and then bleed the radiators. Press reset once. If you have to top up more than a few times a year, water is leaking somewhere. Have an engineer check the system and the expansion vessel.
Other Vaillant codes
- F.28 ignition failed
- F.29 flame goes out while burning
- F.75 no pressure difference when the pump starts
- F.20 overheating
- F.00 flow sensor interrupted
- F.01 return sensor interrupted
- F.10 flow sensor short circuit
- F.27 flame detected while the gas valve is closed
- F.61 fault in the gas valve control
- F.62 gas valve closes too slowly
- F.63 memory error (eeprom)
- F.64 fault in electronics or sensor
- F.73 pressure sensor signal too low
- F.83 dry firing at burner start
Checked in 11-2026. Codes can differ per model; if in doubt, check the manual of your appliance.